Installed Base Service Engineer

Job Summary

Site In Charge will be responsible for complete engineering operations of electrical, HVAC, IBMS and supporting infrastructure.

Responsibilities

• Monitor AIS Switchyard substation parameters (Transformers & associated equipment checklist).
• Coordinate with OEM for online and offline PM.
• Conduct toolbox talks, ensuring permit system for all activities.
• Responsible for monitoring and operation of HT Panel, Transformers, and Main LT Panels.
• Check the cleanliness of Transformer yards, RMG Panel and Main Panel room.
• Carry out the daily checks for Transformers, HT & LT Panels.
• Record the HT & LT Panel readings and Transformer parameter readings for every 2 hours in the shift.
• Check the fire buckets / fire extinguishers in the room, transformer yards and panel room are in place.
• Perform changeover operations in the LT Panel during power failures.
• Respond to any alarms in the equipment immediately.
• Monitor the input HT voltage, transformer LT voltage and transformer tap positions regularly.
• Carry out preventive maintenance checks for the equipment as per the schedule.
• Coordinate with external vendors while carrying out routine service in the HT Panels / Transformers / LT Panels.
• Attend to issues in the Transformers / HT Panels / LT panel immediately with support.
• Monitor power distribution in floor-wise LT panels.
• Supervise floor technicians, shift engineers.
• Plan & coordinate PM for UPS, battery banks, LT & HT panels.
• Coordinate with OEM for online/offline maintenance.
• Respond to alarms, faults & emergencies.
• Conduct shift handover & ensure PTW/LOTO compliance.
• Monitor UPS, LV switchboards, PDUs, SMDBs.
• Check battery bank status & load sharing.
• Supervise load transfer between UPS, generator, mains.
• Ensure isolation/restoration during PM.
• Maintain logs & updates.
• Support troubleshooting & safety compliance.
• Support project activities at site with feasibility surveys, BOQ preparation and supervision during activity execution.
• Ensure the proper operation of chiller systems to maintain a comfortable DC environment or meet specific process requirements.
• The scope shall be limited to the equipment on the high side in the chiller plant operation areas (e.g., chillers, cooling tower, motors and accessory pumps).
• Monitor and control chiller plant operations to maintain optimal temperature levels.
• Develop and implement a comprehensive preventive maintenance program for chiller & HVAC systems to minimize downtime and extend equipment life.
• Coordinate and oversee repairs and maintenance work conducted by OEM & respective vendors.
• Check equipment performance for normal operations.
• Abnormalities to be brought to the attention of both the Client appointed Site Shift Manager as well as OEM.
• Reports: MIS reports, WUE tracking, Water consumption Tracking, Incident Tracking, Equipment history card update.
• Coordinate with HVAC equipment OEMs for ensuring PM, Breakdown & on time submission of service report.
• To manage the site utility infrastructure with zero downtime.
• Evaluate & record CT effectiveness, COC, Chiller efficiency in shifts for controlling the consumption.
• Adherence to PM schedule.
• Preparation of PM calendar and timely update of activities.
• Closure of observation during PM.
• AMC Management / Tracking PO for AMC.
• Tracking of Purchase Requisition.
• Timely intimation of expiry of AMC.
• Coordination with vendor for PM/BM/ incident closure.
• Conducting vendor review meeting.
• Identification of issue/ concerns proactively and bring them to logical closure.
• Carry out repairs as required after details analysis, getting quotes, taking approval, follow for release of PO till release of payment.
• Report generation, Daily, Monthly, as per customer requirement and as required from time to time.
• Analysis of logbooks, FSR from vendors and take appropriate action.
• Adherence to processes and SOPs.
• Updating of process and SOPs.
• Participation in customer audit.
• Closure of NC identified during audit.
• Leave management, Shift management.
• Team building.
• Training.
• Incident Management.
• Change Management.
• Configuration Database Management.
• Disposal of Hazardous/Non-Hazardous Scrap and record update.
• Update records of Statutory Documents.
• Adherence to Policies, Processes and Procedures for which CLIENT is certified.

Qualifications

• Diploma / BE / Btech Electronis

Disclaimer: This job posting has been aggregated from external source. Role details, content, and availability are subject to change. Applicants are advised to confirm the latest information directly on the company website before applying.